The best way to Plunge Cut With a Hand Wood Router

A plunge cut is a form of cut that goes into the the surface of a fabric from above. Plunge-cutting which has a router must only be done which has a specific plunge router along with a plunge-cutting router bit - a router bit that has a bottom cut facility, which suggests their cutting edges extend throughout the bottom in the bit. Other routers are fixed base routers and does not be suited to making plunge cuts.

Be sure to hold the right form of router bit. Ensure that the bit you select is designed to plunge-cut, or, the top will spin contrary to the top of the material and will probably burn it. Plunge cutting router bits could be labelled as bits using a bottom cut function, in case you're unsure make sure the specifications of individual bits before you use them. While using the wrong equipment may damage your machinery as well as your workpiece.



Set the height of the router bit. In order to plunge-cut as a result of a certain depth, you ought to set the depth in your router before working. The method that you do this depends upon the company of router you select, but a majority of use a form of depth stop (often a rod and column) that can be adjusted to the height you require. The depth stop limits the length of time into material the part may be lowered. The Trend branded routers use a 3 turret depth stop that enables you to pre-set 3 separate heights for plunge cutting that can easily be changed while you work.

Step one. Activate the router minimizing the part down on top of the workpiece.

2. Once the bit has cut through the surface, you'll be able to slowly move the router to produce your chosen cut.

Make deeper cuts progressively! Plunging deeper than several millimetres which has a single cut mustn't be done. Instead, you need to come up with a compilation of shallow cuts which will get progressively deeper. This means that less strain lies about the cutting edges of your router bit, and on the router's motor itself.

Take regular breaks. Every now and then you ought to bring the router bit back up from the material swap the router off and so the motor and router bit can cool down, and you may clear any debris from your cut. It's also advisable to clear any waste materials through the cut to stop it from becoming clogged. Be sure you work with an appropriate dust extractor with all the routers.

More info about atc cnc router browse the best resource.